Winco Generators in Canada

About Winco Generators

Winco has been manufacturing generators at its facility in Le Center, Minnesota since 1927. Every Winco generator is built in the USA and 100 percent load tested before leaving the factory. Unlike mass-market generator brands, Winco designs its products for demanding prime power and standby applications where reliability under continuous heavy load is non-negotiable.

Winco generators are built for Canadian homeowners, farms, remote off-grid properties, and commercial operations that require more than a box-store generator. The PSS series is available from 8 kW to over 150 kW and covers both emergency standby and prime power applications.

Winco Generator Models at Volts Energies

Winco PSS8B2W/G — 8,400W Standby Generator

The PSS8B2W/G is an 8.4 kW industrial-grade emergency standby generator powered by a 570cc Briggs and Stratton Vanguard industrial V-twin engine. It has the smallest footprint in its class thanks to Winco's three-chamber housing design, which keeps the unit cool during extended operation.

The PSS8B2W/G carries a prime power rating, making it suitable for both emergency standby and off-grid prime power applications including remote water pumps, cabins, and agricultural properties across Canada.

Key attributes:

• Output: 8,400W (8.4 kW)
• Engine: Briggs and Stratton 570cc Vanguard V-twin industrial
• Fuel: Ships ready for propane, field convertible to natural gas
• Enclosure: Galvanealed steel housing with powder-coat paint for all-weather outdoor use
• Controller: DSE 3110 digital controller with RPM, voltage, frequency, kW, kVA, and kVAR readout
• Cooling: Sure Flow three-intake cooling system for exceptional airflow and reduced heat soak
• Battery maintenance: 1.5A marine-grade battery charger included
• Safety: Low oil shutdown and high coolant temperature protection
• Load tested: 100 percent at the factory before shipping
• Warranty: 1 year or 1,000 hours generator; 3-year engine warranty

Best for: Residential standby, off-grid cabins, remote properties, water pumps, and agricultural use across Canada.

Winco PSS8B2W/F Solar — 8 kW Off-Grid Solar-Compatible Generator

The PSS8B2W/F Solar is the purpose-built off-grid variant of the PSS8 series. It includes a factory-installed 12V solar battery charger that automatically maintains the starter battery between generator cycles, critical for reliable auto-start in remote Canadian locations where the generator may sit unused for extended periods.

External receptacle outlets (one L14-20 20-amp and one 5-20 20-amp duplex) are factory installed with weather-proof enclosures for flexible load connection without additional wiring.

Key attributes:

• Output: 8 kW
• Factory-installed 12V solar battery charger for automatic starter battery maintenance
• Weather-proof external receptacle outlets: one L14-20 (20A) and one 5-20 duplex (20A)
• Engine: Briggs and Stratton Vanguard industrial
• Fuel: Propane or natural gas
• Controller: DSE 3110 digital controller
• Cooling: Sure Flow three-intake system
• 100 percent load tested before shipping
• Designed specifically for off-grid and alternative energy applications

Best for: Remote off-grid cabins, solar-generator hybrid systems, farms, rural properties, and any Canadian location without utility power access.

Winco PSS20B2W/C — 20 kW Home and Commercial Standby Generator

The PSS20B2W/C is the largest single-phase air-cooled standby generator in the Winco PSS series. Powered by the Briggs and Stratton Vanguard big block engine, it delivers 20 kW of reliable standby power for large Canadian homes, small businesses, and agricultural operations.

The PSS20 is suitable for both prime power and standby applications, making it equally appropriate for remote pump stations and whole-home backup. The three-chamber housing design maintains cool operation under sustained heavy loads.

Key attributes:

• Output: 20 kW (single phase, 120/240V)
• Engine: Briggs and Stratton Vanguard big block
• Fuel: Propane or natural gas
• Controller: DSE 3110 digital controller
• Cooling: Sure Flow three-intake cooling system
• Enclosure: All-weather galvanealed steel housing
• Applications: Emergency standby and prime power
• 100 percent load tested before shipping

Best for: Large residential homes, small commercial properties, farms, and remote Canadian installations requiring more than 8 kW of continuous power.

Winco DE4040F — 40 kW Industrial Diesel Generator

The Winco DE4040F is a liquid-cooled 40 kW three-phase diesel generator built for industrial, commercial, and large-scale agricultural applications. Powered by an FPT Industrial diesel engine and available in 120/208V three-phase configuration, the DE4040F is designed for operations that demand continuous high-output power at a professional grade.

Key attributes:

• Output: 40 kW (40,000W)
• Configuration: Three-phase, 120/208V
• Engine: FPT Industrial liquid-cooled diesel
• Includes: Block heater and 54-gallon fuel tank
• 2-amp battery charger included
• Built for continuous commercial and industrial prime power use
• 100 percent load tested before shipping

Best for: Large commercial facilities, industrial operations, agricultural properties, construction sites, and any Canadian application requiring three-phase diesel power at 40 kW output.

Why Choose Winco Generators in Canada?

Built in the USA since 1927: Winco manufactures every generator at its 200,000 square foot facility in Le Center, Minnesota. Decades of engineering experience go into each unit.

100 percent load tested: Every Winco generator is fully load tested before it leaves the factory. Statistical sampling is not used. The generator that arrives on your property has been individually verified to perform to specification.

Prime power rated: Winco PSS generators carry a prime power rating, meaning they are designed to operate as the primary power source at locations without utility grid access. Most residential generators are rated for standby use only and are not designed for continuous prime power cycles.

Solar hybrid compatibility: The PSS8B2W/F Solar is one of the few standby generators on the Canadian market with a factory-integrated solar battery charger, making it purpose-built for hybrid solar and generator off-grid systems. It pairs directly with solar charge controllers and battery banks from Volts Energies.

All-weather construction: Winco's galvanealed steel housing with powder-coat paint is engineered for year-round outdoor exposure across all Canadian climates including prairie winters, coastal humidity, and northern temperature extremes.

DSE 3110 digital controller: Winco's standard digital controller provides real-time operating and diagnostic information including RPM, voltage, frequency, kW, kVA, and kVAR output, giving operators full visibility into generator performance at all times.

Frequently Asked Questions

Is Volts Energies an official Winco dealer in Canada? 

Yes. Volts Energies is a certified Winco dealer in Canada, authorized to sell and support the full Winco generator lineup with nationwide shipping.

What is the difference between standby and prime power ratings? 

A standby-rated generator is designed to run occasionally during grid outages. A prime-power-rated generator is built to operate as the continuous primary power source at locations without grid access. Winco PSS generators are prime power rated, making them suitable for remote off-grid use as well as emergency standby.

Can a Winco generator work with a solar system? 

Yes. The Winco PSS8B2W/F Solar is specifically designed for solar hybrid off-grid systems. It includes a factory-installed 12V solar battery charger that keeps the starter battery maintained between generator cycles, enabling reliable auto-start even after long periods without use. It pairs with solar panels, charge controllers, and battery storage available at Volts Energies.

What fuel does a Winco PSS generator use? 

Winco PSS8 and PSS20 generators ship ready to run on propane and are field convertible to natural gas. The DE4040F runs on diesel. Fuel type should be confirmed at the time of purchase to ensure proper installation.

How long has Winco been manufacturing generators? 

Winco has been producing generators in the USA since 1927. Every unit is manufactured at their facility in Le Center, Minnesota and 100 percent load tested before shipping.

What warranty does Winco offer? 

Winco PSS generators are covered by a 1-year or 1,000-hour generator warranty. The Briggs and Stratton Vanguard engine carries a separate 3-year warranty. Contact Volts Energies for full warranty details on specific models.