Victron Energy Phoenix Charger 12/50 (2+1) 120-240V

• Charge control: adaptive charging


• BatterySafe function: prevents the battery from being damaged by off-gassing


• Storage mode: limits premature ageing


• Adaptation on different grids: 90V - 265V in 50/60 Hz and 90V - 400V in DC


• Improved battery life


• Temperature and voltage sensor

The 4-step charging algorithm (Bulk, absorption, float and storage) ensures better battery performance. The charger has an "adaptive" management, which can be configured, allowing it to adapt according to the technology of the battery, and according to the use of the battery.

The BatterySafe function enables fast charging by measuring the gas emission during charging. In case of too much gas, the charge is limited so as not to damage the battery.

Recharging time can be variable depending on the state of charge of the battery, if the battery is partially discharged, the charging time will be automatically reduced to avoid overcharging.

The Pheonix Charger is equipped with a standby function, it turns on when the battery is not used for 24 hours. This mode varies the voltage at the cell terminals to limit the effects of premature battery aging.

The Pheonix battery charger is a range that can be used anywhere, thanks to its wide supply voltage range, from 90V to 265V in 50/60 Hz and from 90V to 400V in DC. It is therefore able to supply, without any adjustment, its nominal power on different grids.

All models are equipped with a temperature sensor for the batteries. This is to limit or even stop the charge if the temperature raises too high, thus preventing damage to the batteries. They are also equipped with a voltage sensor that directly measures the voltage at the battery terminals to take into account the voltage loss of the charger cables.