Why 2024 is the Year For Bifacial Solar Panels

Publié par Tina Kassaeian le

A Comprehensive Guide to Bifacial Solar Panels in 2024
In the quest for cleaner and more efficient energy sources, solar power stands out as a leading contender. Among the latest innovations in this field, bifacial solar panels are garnering significant attention. These advanced solar panels, capable of capturing sunlight from both sides, promise to revolutionize solar energy production. As we step into 2024, bifacial solar panels are poised to become a game changer in the industry.
This blog delves into the mechanics, benefits, potential impact, and considerations of investing in bifacial solar panels, and why 2024 is the year to embrace this technology.

Understanding Bifacial Solar Panels

Bifacial solar panels differ from traditional solar panels primarily in their design and functionality. Traditional solar panels, or monofacial panels, have photovoltaic cells on one side that face the sun. In contrast, bifacial panels have photovoltaic cells on both sides, allowing them to capture sunlight directly from the sun and indirectly from reflections off surfaces like the ground, rooftops, or nearby structures.

The design of bifacial panels typically involves a transparent layer, such as tempered glass, on both sides of the cells. This not only allows light to pass through to the rear side but also provides extra protection against environmental factors. Some designs use transparent backsheets instead of glass to reduce weight and costs.

Maximize Your Solar Energy with Bifacial Panels in 2024

The Mechanism Behind Bifacial Panels 

The efficiency of bifacial solar panels stems from their ability to harness light that would otherwise be wasted. When sunlight hits the front of the panel, it behaves like a conventional solar panel, converting photons into electricity.

However, when light hits the ground or other surfaces and reflects onto the rear side of the panel, it also gets absorbed and converted into electricity. This dual absorption mechanism can significantly boost the total energy output of the panels.

The efficiency gain from bifacial panels depends on several factors, including the reflectivity of the ground surface (albedo), the angle of installation, and the height above the ground. For instance, installing bifacial panels on a highly reflective surface like white gravel or a reflective roof membrane can enhance their performance.

Benefits of Bifacial Solar Panels 

#1 Increased Energy Output: The most notable benefit of bifacial solar panels is their higher energy output. Depending on the installation and environmental conditions, bifacial panels can produce up to 30% more energy than their monofacial counterparts. This increased efficiency can lead to a significant reduction in the number of panels needed for a given energy target, optimizing space and resources. 

#2 Better Performance in Low Light: Bifacial panels are more effective in diffuse light conditions, such as on countries with cold weather or during sunrise and sunset. The rear side can capture scattered light, contributing to overall energy production even when direct sunlight is minimal. 

#3 Durability and Longevity: Bifacial panels are often built with robust materials, such as double glass layers, enhancing their durability. This makes them more resistant to environmental stressors like hail, wind, and snow, translating to a longer lifespan and lower maintenance costs. 

#4 Aesthetic and Design Flexibility: With their sleek and modern appearance, bifacial panels can be integrated into various architectural designs. They are particularly suitable for off-grid installations where aesthetics are important, such as in residential areas, commercial buildings, and solar canopies. 

Harness More Power with Bifacial Solar Panels in 2024

Panneaux solaires Applications of Bifacial Solar Panels 

Bifacial solar panels are versatile and can be used in a wide range of applications:

Ground-Mounted Systems: When installed on the ground, bifacial panels can benefit from high albedo surfaces like white gravel, sand, or even snow, enhancing their rear-side energy capture.

Rooftop Installations: For flat or slightly tilted roofs, bifacial panels can be optimized to capture reflected light from the roof surface, improving overall efficiency.

Solar Canopies and Awnings: Bifacial panels are ideal for solar canopies and awnings, where light can pass through to the rear side, generating additional electricity and providing shade.

Floating Solar Farms: On water bodies, bifacial panels can take advantage of the reflective properties of water surfaces, leading to significant efficiency gains.

2024’s Most Efficient Bifacial Solar Panels

Is It Worth Buying Bifacial Solar Panels? 

Investing in bifacial solar panels requires careful consideration of several factors: 

Higher Initial Costs: Bifacial panels are generally more expensive to produce than monofacial panels due to their complex design and the materials used. However, their higher efficiency and longer lifespan can offset these initial costs over time. The upfront investment might be higher, but the return on investment (ROI) can be substantial due to the increased energy production. 

Installation Complexity: Proper installation is crucial to maximize the benefits of bifacial panels. Factors like tilt angle, height above ground, and the reflectivity of the installation surface must be carefully considered. This might require more sophisticated planning and potentially higher installation costs.

Performance Variability: The performance of bifacial panels can vary significantly based on environmental conditions and the installation site. Detailed site assessments and simulations are often required to predict and optimize their performance. If the site conditions are optimal, the performance gains can be remarkable, but suboptimal conditions may not justify the additional expense. 

Energy Savings and Incentives: Depending on your location, there may be incentives or rebates available for installing more efficient solar systems, which can help offset the initial costs. Additionally, the long-term energy savings from the increased efficiency of bifacial panels can make them a worthwhile investment. 

Top Benefits of Bifacial Solar Panels

Key Features of the Best Bifacial Solar Panels

To ensure you're getting the most out of your investment in bifacial solar panels, look for these essential features:

  1. High Efficiency and Output: Panels with advanced cell technology, such as PERC (Passivated Emitter and Rear Cell) and half-cut cells, which improve efficiency and energy output.
  2. Durable Construction: Sturdy materials, like tempered glass and robust framing, that can withstand harsh weather conditions and minimize maintenance costs.
  3. Advanced Cell Design: Features like multiple busbars and high-quality monocrystalline cells, which enhance light absorption and reduce resistance.
  4. Temperature Coefficient: A low temperature coefficient to ensure better performance in high temperatures.
  5. Anti-PID Performance: Panels that offer excellent anti-Potential Induced Degradation (PID) performance to ensure long-term reliability and power output.
  6. Warranty: Comprehensive product and power warranties to protect your investment over the long term.
Understanding Bifacial Solar Panel Efficiency

The Best Bifacial Solar Panels in 2024: Elios Solar Panels

When it comes to cutting-edge solar technology in 2024, the Elios bifacial solar panels stand out as the best choice for both commercial and off-grid applications. Elios offers two models: the 400W and the 550W, each designed to deliver exceptional performance and reliability. 

Elios 550W BiFacial Mono Solar Panel 

The Elios Voltaic550HC-BF is a state-of-the-art 550W bifacial mono solar panel that surpasses expectations with its advanced design and technology. It can generate over 700W of electricity under optimal conditions, making it a powerhouse for both commercial and off-grid applications. 

Best Bifacial Solar panel: Elios Panels

Key Features: 

  • High-Efficiency Cells: Utilizes new M10 cells and PERC technology for superior energy conversion. 

  • Innovative Design: Features a 10-busbar layout and half-cut cells, enhancing light absorption and reducing energy loss. 

  • Robust and Lightweight: Built with sturdy materials for durability while remaining lightweight, ideal for residential rooftops. 

  • Improved Performance: Lower susceptibility to micro-cracks and better performance in high temperatures due to the half-cell design. 

  • Versatile Applications: Suitable for a range of uses, including off-grid systems, residential, commercial, and industrial installations. 

  • Excellent Warranty: Comes with a 12-year product warranty and a 25-year linear power warranty, with only -0.5% annual degradation. 


Bifacial solar panels represent a significant leap forward in solar technology, offering a powerful combination of increased efficiency, durability, and aesthetic appeal. As the world moves towards a more sustainable energy future, these innovative panels are poised to play a crucial role in meeting the growing demand for clean, renewable energy. 

By embracing bifacial solar panels, we can optimize our use of available space, reduce our carbon footprint, and accelerate the transition to a greener, more sustainable energy landscape. While the initial investment may be higher, the potential for greater energy production and longer panel lifespan makes them a compelling choice for those looking to maximize their solar energy system’s performance and efficiency. 

Contact us if you have any question and get a free quote from solar experts for your solar installation and projects in Canada.

Partager ce message

← Message plus ancien Message plus récent →

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant leur publication.

We use cookies to provide and improve our services. By using our site, you consent to cookies.